Puig For the bike model Aprilia SHIVER 750 2012 Puig

22 Mar 2015 | Author: | Comments Off on Puig For the bike model Aprilia SHIVER 750 2012 Puig

Led flasher relay 2 pin for Aprilia SHIVER 750 2012

You are watching the generic image of the product, so it is not related with the bike model selected.

Where can this product be purchased? Find your closest dealer

Indispensable product for your motorbike if you want that your turn lights have a uniform and intense winking.

Technical info turn signals connections:

Most of the bikes use bi-metallics relay. Its frequency (which is the one that sets the pace of the turn signals) depend on the amperage circulating through the circuit. When replacing the turn signals from OEM to aftermarket ones which carry a difference power, consequently they vary the amperage circulating through the circuit and that causes a change on the frequency of the turn signals rhythm.

If otherwise, the motorcycle uses electronic relay (which frequency works independently from the amperage circulating through the circuit) the change of turn signals from OEM to aftermarket, should not affect the frequency of the turn signals rhythm.

Nota: we recommend in case of doubt of what type of relay the motorcycle uses, to check the turn signal rhythm after switching from OEM to aftermarket.

If the OEM turn signals are replaced by aftermarket ones that use incandescent bulbs, it is needed to check they use the same power. In case is different, it is needed to replace the turn signals bulbs for other that uses the same power as OEM ones. On our catalog, we have available bulbs of different power.

If the OEM turn signals are replaced by LED ones (of much less power than incandescent bulbs), we have two options to balance the frenquency of rhythm:

1)- Incorporate a parallel relay in the right circuit and the other on the left circuit. If we replace four turn signals, it is needed to use a resistance part# 4298O. If otherwise, only two turn signals are replaced (one on each side), it is needed to use a resistance part# 5873O.

Aprilia Shiver 750

The resistance are supplied with a scheme for a parallel connection.

Nota: On most of the bikes, the warning function of the bike is unabled if the resistance is used.

2)- Identify the intermittence relay of the motorcycle (location and number of pins) and replace for its corresponding from the list supplied.

On most of the bikes, the warning functions works correctly when the relay is replaced.

Nota: it can be found on the market some motorcycles that do not have a intermittence relay; obviously, in this case it cannot be replaced. Moreover, if on the blinking function intervenes more than one relay, it is possible that replacing only one relay does not solve the problem.

Check availability of this product for other bikes.

Aprilia Shiver 750
Aprilia Shiver 750
Aprilia Shiver 750


Interesting articles

Tagged as:

Other articles of the category "Aprilia":

Translation
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Motorcycles catalog with specifications, pictures, ratings, reviews and discusssions about Motorcycles.