What is the best engine oil for Honda wave 125

19 Апр 2015 | Author: | Комментарии к записи What is the best engine oil for Honda wave 125 отключены
Honda ANF 125

What is the best engine oil for wave 125?

Answer:

synthetic 0w-40.

This is

A Honda Wave engine, most engines today, is to run with an oil that has a ‘runniness’ (a of around 12-15 C/s (centistokes. A of how fast it pours through a sized tube)

An oil with the number of ’40’ has a runniness of c/s WHEN HOT.

The ‘runniness’ of the oil is to the engine’s health. if the oil is too thick, it not pump around the engine and the engine will suffer wear. If it is too thin, the oil will not be to provide a strong enough between the moving metal and again, the engine will wear.

The problem is that before the oil is hot, (depending on the numbers on the it may be MUCH thicker than the is designed to use, and then the will wear while it up. How quickly it wears depends on how the oil is when you first start the

Remember, between 75 and 90 percent of ALL wear happens when the is first started and the oil is cold and too

The science bit!

A multigrade oil has two which tell us how it behaves.

The number tells us how it behaves at 40 deg C temperature of a hot bath) the second tells us how it behaves when the is fully hot (100 deg C)

Don’t forget, ALL multigrades the same at 100 deg C if the last number is the on the can!

Even at 40 deg C, which is hotter than ANY engine be before it first starts, no how hot the day is, a straight 40 oil will be over 10 thicker than the engine is to use. It will of course be at 100 deg C because it is a 40 when hot.

At 0 deg C it be over 250 times too thick and many miles ridden to to a safe viscosity.

When first started cold, the engine with oil in will suffer EXTREMELY relative levels of wear.

A will be nearly 5 times than the engine needs at 40 deg C, It of course be correct at 100 deg C because it is a 40 hot.

At 0 deg C it will be over 80 too thick and take several ridden to drop to a safe

When first started cold, the engine with oil in will suffer HIGH levels of wear.

Honda ANF 125

A 15w-40 be around 4 times thicker at 40 deg C, It of course be correct at 100 deg C because it is a 40 hot.

At 0 deg C it will be over 50 times too and take some miles to drop to a safe viscosity.

first started from the engine with this oil in suffer MODERATE relative of wear.

A 0w-40 will be the runniness for a hot engine at 40 deg C. and also at 100 deg C . Because it is a 40 when hot.

At 0 deg C it be just 6 times too thick, and take by far the lowest number of ridden to drop to a safe

When first started cold, the engine with oil in will suffer the LOWEST levels of wear and so last the

As a bonus, all 0w-40’s are fully oils and synthetic oils are better at protecting VERY hot as well, remaining at the correct and not getting very thin, (or still, breaking down if the engine is working very

Therefore, currently, the best oil for a Wave is a fully synthetic no matter WHAT temperature the how long your journey or how your engine works .

Some 0w-XX oils special additives to make more slippery and so help be more economical Those may cause a Honda Wave’s oil clutch to slip, so if you are not sure if the oil is this kind or not, buy motorcycle specific oil.

Honda ANF 125
Honda ANF 125
Honda ANF 125
Honda ANF 125
Honda ANF 125


Interesting articles

Tagged as:

Other articles of the category "Honda":

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Motorcycles catalog with specifications, pictures, ratings, reviews and discusssions about Motorcycles.