KTM 125 200 250 300 SX Mxc Exc — 2003 manual, review

1 Мар 2015 | Author: | Комментарии к записи KTM 125 200 250 300 SX Mxc Exc — 2003 manual, review отключены
KTM 125 EXC
KTM 125 EXC

Manual

Instruction: After Download and complete offer, you get access to list of direct to websites where you can download manual.

About

About KTM 125 200 250 300 SX Mxc Exc 2003

Here you can find all KTM 125 200 250 300 SX Mxc Exc — 2003 like and other informations. For example:

Documents

Anzeigemodus SPEED/ODO The mode shows the speed and the kilometers traveled. When the wheel stops turning, the will automatically change to the mode. The information will in the display when the front stops turning for 1 minute. A Tripmaster switch is available as an and enhances the electronic speedometer by the following functions: 2x Tripmaster 2x for the lap time Average speed speed Clock Display in


Tripmaster switch

The switch has buttons: MODE, + (plus) and

NOT TRY TO CHANGE THE MODE OR READ THE WHILE DRIVING. YOUR WILL BE DISTRACTED FROM THE WHICH CAN EASILY LEAD TO AN

Electronic speedometer functions by the Tripmaster switch

The display on the electronic speedometer will in the following order. If not, read the chapter ACTIVATING AND THE DISPLAY MODE.

ODO displays the or miles traveled. The displayed cannot be cleared. + BUTTON no BUTTON no function press the BUTTON to change to the next press and hold the MODE 3 SECONDS to change to the next

SPEED/MAX display mode MAX the maximum speed. It is always + BUTTON no function BUTTON no press the MODE BUTTON to to the next mode press and the MODE BUTTON 3 SECONDS to the MAX figure to 0

SPEED/LAP display LAP displays the stopped lap time in minutes and seconds. Starts and the stop watch. The lap time is not to 0. Stops the running stop stores the lap time and restarts the watch.

The time is reset to 0. A total of 10 lap can be stored and read in the SPEED/LAP mode. To clear all of the stored lap hold the MODE button for 3 in the SPEED/LAP mode. press the BUTTON to change to the next If no lap time is stored or the motorcycle is the LAP/LAP mode will be press and hold the MODE 3 SECONDS to reset the LAP figure and all lap times to 0 LAP/LAP display The lap number is shown at the top and the lap time in minutes and seconds at the bottom of the

If no lap time is stored or the motorcycle is the LAP/LAP mode will be Hold the MODE button for 3 in the SPEED/LAP mode to clear the lap times. + BUTTON changes to the lap time. BUTTON no function the MODE BUTTON to change to the mode press and hold the BUTTON 3 SECONDS to change to the mode + BUTTON BUTTON

SPEED/ODO display mode displays the speed in KPH or MPH. The figure cannot be cleared.

(clock) display mode CLK display time in hours, and seconds. + BUTTON no function no function press the MODE to change to the next mode. and hold the MODE BUTTON 3 to set the time in the menu (see THE CLOCK)

KTM 125 EXC
KTM 125 EXC

SPEED/H (hours) mode When you stop and no impulses are sent from the sensor, the display mode automatically change from to SPEED/H. H shows the operating The operating hour counter to count as soon as you start the The displayed figure cannot be

Service intervals are indicated in hours for some KTM offroad making the operating hour a very practical function. + no function BUTTON no function the MODE BUTTON to change to the mode press and hold the BUTTON 3 SECONDS to change to the mode (see REVEALING/CONCEALING

SPEED/TRP1 (trip 1) display The TRP1 trip meter is active and counts to 999.9. It is to measure the length of a trip or the between 2 refueling stops. is linked to AVS1 and STP1. The of these figures is activated by the impulse received from the sensor (when the front starts to turn) and stops 3 after the last impulse is (when the front wheel has

The TRP1, AVS1 and STP1 are automatically reset to 0 after 999.9. + BUTTON no function no function press the MODE to change to the next mode. and hold the MODE BUTTON 3 to automatically reset the TRP1, and STP1 figures to 0. SPEED/AVS1 speed 1) display mode is always active and shows the speed based on the TRP1 and figures. The calculation of this is activated by the first impulse from the wheel sensor and 3 seconds after the last is received. + BUTTON no function no function press the MODE to change to the next mode and hold the MODE BUTTON 3 to reset the TRP1, AVS1 and figures to 0.

SPEED/STP1 (stop 1) display STP1 shows the traveling based on TRP1 and continues to whenever it receives impulses the wheel sensor. The calculation of figure is activated by the first received from the wheel and stops 3 seconds after the impulse is received. + BUTTON no BUTTON no function press the BUTTON to change to the next press and hold the MODE 3 SECONDS to reset the TRP1, and STP1 figures to 0.

no function no stops LAP, stores LAP resets LAP to 0 no function no function no no function

X X X X X

LAP / LAP SPEED / CLK SPEED / H X SPEED /

next display mode display mode next mode next display

next display mode set menu display setup resets TRP1, STP1 and to 0 resets TRP1, STP1 and to 0 resets TRP1, STP1 and to 0 resets TRP2 to 0 next mode sets STP2 to 0

KTM 125 EXC
KTM 125 EXC
KTM 125 EXC
KTM 125 EXC

articles

Tagged as:

Other articles of the category "KTM":

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Motorcycles catalog with specifications, pictures, ratings, reviews and discusssions about Motorcycles.