Kouba Link

18 Фев 2015 | Author: | Комментарии к записи Kouba Link отключены
Suzuki AN 250 S


Motorcycle Suspension

with products available Kientech Engineering

Installation Fits: Kawasaki 1994-up and 06-up KLX250H6F Dual

*These links will fit the KLX250S/SF dual sport and models, but lowers the rear 1/4 than on the 06-08.

(Link KLX2, KLX3 KLX4)

links also fit the 2001-2003 The KLX4 links lower the rear approx. 1 1/4 require 2 ea. 1/4 washers on the mounting bolts to up for the thicker stock links.

We will suppy them at no charge, be sure to let us know putting them on the 2001-2003 RM125/250.

*The KLX4 lower the Kawasaki rear 2 but are only for non-aggressive riders require the maxium lowering.

links shown above.

1) the motorcycle with a bike milk crate, etc. so the wheel is just

slightly off the Remove the two 17 mm nuts from the that hold

the links to the rocker and swing You may have to remove the lower

roller and the screw holding the of the rubber swing arm protector to

the link bolts to be removed out the side. (Not required on the

sport model KLX250.) the rear wheel slightly to the first bolt to

2) After the stock links you should be to install the KoubaLinks.

(engraving to the outside, right is readable, left link backwards)

Install the links sure the link on the nut end of the mounting is

over the shoulder on the bolt tightening. Install the mounting nuts

3) For the best performance set the sag (amount of vertical movement of

Suzuki AN 250 S

the axle FROM no weight to weight plus rider at 3 3/4

with the KLX2 links, 3 with the KLX3 links, and 3 with the KLX4

links. is set by tightening or loosening the rear preload with the

nuts on top of the Sag is measured with the rider in riding gear,

standing on the and including all carried items. If the are for

lowering purposes ONLY, sag is set at 3.90 inches, and will the rear

of the bike .75 with the KLX2 1.125 with the KLX3 and 2.0 with

the KLX4 links.

4) The forks can be slid up in the triple .5 until they almost

the handlebars. For additional lowering of the a second set of the top

handlebar clamps can be under the bars and tightened 3/4

Suzuki AN 250 S
Suzuki AN 250 S
Suzuki AN 250 S
Suzuki AN 250 S

Interesting articles

Tagged as:

Other articles of the category "Suzuki":

Our partners
Follow us
Contact us
Our contacts


Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Motorcycles catalog with specifications, pictures, ratings, reviews and discusssions about Motorcycles.