Street Tracker Straightspeed Page 4

18 Май 2015 | Author: | Комментарии к записи Street Tracker Straightspeed Page 4 отключены
Suzuki Grass Tracker

Project TS250 – Little, and not too

Early model TS400 and ’76 RM 125 forks partially fitted

I a set of forks from a 1976 on “that” auction site. still got 36mm diameter and still drum for brakes but from having air assistance as with better internals post a side by side next time I get the chance) and the (triple tree’s if you are Stateside) are all Even better, it was an easy

I’ve just had to press on the bearing cup, and it all went on a – If funds allow, the bearings be replaced with roller but the originals are in A1 condition it’s not a have at this stage. All overall the RM forks are a bit longer, the steel 21″ wheel rim is being with an alloy 19″ rim (another find, originally fitted to a I think, also found a alloy rim for the rear from an old Also the spindle is an offset rather than at the bottom, will give a bit less From the photo you will see ideally I’ll need bar risers if I stick to my Flat Bar (thats just some diameter Stainless tube I the wall’s a bit to thin otherwise I’d use

The tank is an earlier – ’76 again I – TS250/400 Tank. Sits on the perfectly, but ideally I’ll to cut and weld the rear most point on the frame to secure it (I get away with a strap of kind)

By using the RM Yokes, I’ll the clock mounting lugs, is fine, as I only want a I’ve already drilled and some holes in the lower for the number board. I cant a decent looking off the shelf to attach the board yet though.

I can the 100mm headlamp the same but the dominator style lamp picked up is, with hindsight, a bit too If I cant find another, I can the disc cutter coming out I’ll probably not drill a for the steering lock and just the lug of the frame.

They’re crap at best, and stop it being stolen.

Yet ebay find, an unused, but Expansion Chamber. What it was for I’;ve no idea, but took a on it anyway. A bit of cutting and welding and it can be to fit, either over the as per the original, or hanging under the road bike style.

I like the idea of both.

been pondering the seat? I a “Brat style” cut down low seat, but I dont think it work using the original pan. Do I make a glass base, or an alloy base, or do I another and “adapt” it.

Suzuki Grass Tracker
Suzuki Grass Tracker
Suzuki Grass Tracker
Suzuki Grass Tracker

Interesting articles

Other articles of the category "Suzuki":

Our partners
Follow us
Contact us
Our contacts

Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Motorcycles catalog with specifications, pictures, ratings, reviews and discusssions about Motorcycles.