Velocity Racing Suzuki GSXR 1000 Turbo Kit – Tobefast

Velocity Racing Suzuki GSXR 1000 Turbo Kit
Description
Velocity Racing Suzuki GSX-R 1000 Turbo Kit (2001-2013) brought to you by ToBeFast.com, the Leader in Suzuki GSXR Turbo Performance. See below for information of each stage and setup available. Use the pull down menu to select the stage kit and options for your purchase.
NOTE: Include exact year in notes when ordering.
VELOCITY RACING GSXR 1000 TURBO KIT DESCRIPTION
Stage 1: This turbo was designed for practical everyday use. It is intended to be bolted onto a stock motor and utilize gas station 93 octane pump fuel. Power delivery is very docile and predictable. The motorcycle will still perform and act as stock with no hindrance from the addition of the turbo system. Our turbo kits are built with high quality stainless steel headers and exhaust pipes.
They are guaranteed for the life of your system. The kit comes with everything you need for the install with the exception of the Power Commander.
VELOCITY RACING SUZUKI GSX-R 1000 TURBO KIT SYSTEM FEATURES
Custom Garrett GT 2860 turbo and stainless header
Turbo oil pressure and return lines
Boost and fuel pressure gauge package
All clamps, boots and brackets for the complete install
Powder coated air plenum
Stainless steel header and dump pipe
High volume fuel pump and all fuel lines and fittings
Fuel management unit and fuel filter
Oil cooler line block off plates
KN air filter
Custom fuel map for the power commander
Stage 2: This system was designed for the serious turbo enthusiast. You can bolt this system on a stock motor and build 250 rear wheel HP using water injection or race gas. But the real intention of this system is to be strapped to a fully built motor.
Twist the throttle of this bad boy and 330 mind blowing rear wheel HP comes out to play. Wanna take a ride?
System features
Custom garrett GT2860 turbo
Stainless steel header and exhaust dump pipe
External 38mm TIAL wastegate
Boost gauge
Piggyback computer with race proven fuel map
Powder coated air plenum with built in fuel rail and secondary injectors
High volume fuel pump with all fuel lines and fittings
Pre set regulator
Oil cooler line block off plates
All boots, clamps and brackets for the complete install
KN air filter
Stage 2: with Dual Ball Bearing Turbo
Warning read further at your own risk! When Barry and the gang at Velocity Racing build a personal streetbike, this is the system they use. This system uses our special Dual Ball Bearing turbo.
Boost comes in sooner than the other systems for maximum low end RPM horsepower. At the upper RPM range, 400 ground shaking HP is unleashed for maximum high end thunder. Here is where the competition starts to shake!
How do you like me now?
System information
Custom Garrett GT2871 turbo
Stainless steel header
Stainless steel exhaust dump pipes
External 38mm TIAL wastegate
Boost gauge
Piggyback computer with race proven fuel map
Custom air plenum with built in fuel rail and secondary injectors
High volume bosche fuel pump
Pre set bosche regulator
Oil cooler line block off plates
All boots, clamps and brackets for the complete install
Stage 3: Piggy Back ( NOTE: Data logging option also available on the pull down menu at an additional cost)
As fate would have it, the time came for us to build the meanest, the baddest, the quickest, the fastest and the most revolutionary turbo system on the planet. Out of the smoke and dust from this genisis everged the birth of our stage 3 systems. Each one with a different purpose in mind, and each one unbeatable in its purpose. We’ll start with the stage 3 piggyback.
This system utilizes the stock wiring harness, stock computer and stock ignition. But, don’t let that fool you. This system provides 480 rear wheel hp. A perfect system for the enthusiast who may not be a wiring guru. Or for someone not willing to pay for a wiring guru.
With the stock computer running the bike, you get all the driveability of a stocker while at the same time the power of a pro street bike. As we say at Velocity, the best of both worlds.
System features
Custom Garrett GT35R turbo
Stainless Steel header
Stainless Steel exhaust dump pipe
External 46mm TIAL wastegate
Piggyback computer with race proven fuel map
Custom Air plenum with built in fuel rail and secondary injectors
High volume bosche fuel pump with all fuel lines and fittings
Pre set bosche regulator
All boots, clamps and brackets for the complete install
KN air filter
SUZUKI GSX-R 1000 TURBO KIT FITMENT GUIDE
SUZUKI GSX-R 1000 2001
SUZUKI GSX-R 1000 2002
SUZUKI GSX-R 1000 2003
SUZUKI GSX-R 1000 2004
SUZUKI GSX-R 1000 2005
SUZUKI GSX-R 1000 2006
SUZUKI GSX-R 1000 2007
SUZUKI GSX-R 1000 2008
SUZUKI GSX-R 1000 2009
SUZUKI GSX-R 1000 2010
SUZUKI GSX-R 1000 2011
SUZUKI GSX-R 1000 2012
SUZUKI GSX-R 1000 2013
NOTICE PLEASE SPECIFY WHAT YEAR BIKE WHEN ORDERING
All our products are Intended for offroad or show use only.
NOTICE : All Velocity Racing Turbo Kits are made to order and take 4-12 weeks to complete from the time of order. Since these kits are custom built to order for your bike, there are no refunds once committing to buying a kit. These are the best kits on the market today bar none.
The fastest bikes run Velocity Turbo Kits.
Velocity Racing Motorcycle Sport Bike Turbo Systems from McCoy Motorsports: TOBEFAST! – Thanks for your business.
Interesting articles
Share this article:
Other articles of the category "Suzuki":
-
Drysdale 2x2x2- 2WD Overview
-
Home
-
2013 Suzuki Burgman 400 Top New Motorcycles
-
GP’s Classic Steel #63: 2005 Suzuki RM250 Pu...
-
The GSResources – Stator Papers I – A ...
-
We test: Suzuki SFV 650 Gladius – small cran...
-
Suzuki Burgman scooter runs on fuel cell Green Tec...
-
2006 Ninja 650R vs Suzuki SV650 – Motorcycle...