மிக எழுத படிக்க

டுகாட்டி Hypermotard 1100 – motorcyclist இதழ்

19 பிப்ரவரி 2015 | ஆசிரியர்: | இனிய comments மீது டுகாட்டி Hypermotard 1100 – motorcyclist இதழ்
Ducati Hypermotard 1100


Hypermotard 1100

Ringleader: Brian Catterson

Msrp (2008): $11,995

Miles: 7332-10,346

Average Fuel Mileage: 37 Mpg

Accessories Modifications: Dynojet Power Commander, California Cycleworks gas tank, Race Tech suspension, Shad top trunk

Suspension tuning was a work in progress, as finding the optimal settings proved elusive. In stock trim our Hyper was too softly sprung, harsh over small bumps and yet blew through the stroke on bigger hits.

So we took it to Race Tech, where technicians fitted stiffer springs (1.0 kg/mm front, 10.7 kg/mm rear), revalved the shock and installed a G2-R cartridge kit in the fork ($2046.86 total from www.racetech.com ). This let the bike ride higher in the stroke and pitch less under braking and acceleration, but made the fork even harsher. It took two return visits to get it right.

Do yourself a favor and decide up front whether you want your suspension sport-touring supple or sportbike-stiff, because you can’t have both. Or order the S-model with its uprated Öhlins suspension in the first place!

Parting is such sweet sorrow. After nearly two years, my long-term Hypermotard has finally returned to DNA. That’s what insiders call Ducati North America, incidentally, not some failed science experiment.

In terms of maintenance, the Hyper was a model of reliability. Our first-year model had two recalls early on: one to flash the dash so the tripmeter was accurate, and the second to install a supplemental battery bracket. Beyond that, we simply changed the oil every 3000 miles or so and had the valves checked at 7500 ($585)-the latter service interval having been increased from 6200 மைல்கள் ’08.

We also replaced the rear brake pads ($26) at that point, the fronts just starting to wear thin at the end of our test. The bike went through three sets of tires during its stay, the last a set of supermoto-style Dunlop D616s ($173.95 front, $219.95 rear) that were just about worn-out when we returned the bike. The chain and sprockets are also due for replacement.

Aside from these service items and various upgrades, the only part we replaced was the left rear side panel ($77.50), which cracked at its upper mount when we put too much stress on it while coaxing the LeoVince exhaust into place.

California Cycleworks gas tank resembles the stocker but is literally twice the size, doubling range and halving fill-ups.

California Cycleworks gas tank resembles the stocker but is literally twice the size, doub

As detailed in our three previous updates, the Hyper underwent a dramatic transformation in our hands, first becoming a pseudo-sport-tourer and then a full-on supermoto. For this final go-round we blended the best of both, fine-tuned a few things and added a couple of new parts as well.

In spite of its aggressive appearance and racy name, the Hypermotard is in fact one of the friendliest and most versatile motorcycles on the market today-and more so thanks to the extensive Ducati aftermarket. From commuter to canyon-carver to track-day scorcher to sport-tourer, the Hyper does it all, and does it well. I’m truly sorry to see this one go.

Ducati Hypermotard 1100

Let’s talk about the last stuff first: When the fine folks at California Cycleworks (www.ca-cycleworks.com ) read my report about running out of gas en route to Las Vegas, they promised to send me one of their new, larger HM69 gas tanks ($799) as soon as they were ready. It took a few months, but the wait was worth it.

The rotationally molded polyethylene tank is one of the most ambitious aftermarket parts ever, amazingly doubling fuel capacity to 6.4 gallons without affecting the look or feel of the bike-though it is nearly 20 pounds heavier when full. Fuel range goes up accordingly, my personal best standing at 230.3 மைல்ஸ். This added volume was achieved by replacing the airbox with individual filters, repositioning various electrical components and tipping the battery on its side.

The only downside is installation: Even with the detailed directions, expect to spend a full day in the garage if you’re mechanically inclined or to pay a mechanic four or more hourslabor if you’re not. The most economical method would be to have it installed at the same time as a major service.

Our other new part likewise came after a few monthswait. Spanish-made Shad luggage is a new player in the U.S. market, and the company’s color-matched SH29 top trunk ($142 from www.binetto.com ) seemed the perfect complement to the Ducati Performance luggage rack we’d fitted previously.

And it was, bolting on with minimal fuss using the provided hardware and surviving a few weeks of commuting before tagging along on my final ride to the inaugural Motomarathon in Colorado (see Cat Tales, page 7). There I apparently stuffed enough in the trunk that it exceeded the 12-lb. weight limit of the rack, which broke at a weld, smashing the taillight lens. Oops.

A picture is worth 1000 words-or in this case, 10,000 மைல்ஸ். Check-engine light stayed on after we removed the stock exhaust system with its power valve.

A picture is worth 1000 words-or in this case, 10,000 மைல்ஸ். Check-engine light stayed on

In our most recent update we told you to stay tuned for tuning, and that we did. We first tried a high-flow KN air filter ($79 from www.knfilter.com ) coupled with a DP Racing ECU, which worked perfectly with our Leo-Vince SBK GP Style Evo II exhaust (exhaust $749, link pipe $299 from www.leovinceusa.com ). Said ECU is included with the $2500 DP Termignoni 2-into-1 pipe, or is available separately for around $1300, which is far more than even a well-heeled Ducatista would care to spend.

The low-buck option is a FatDuc O2 Manipulator ($80 from www.fatduc.com ). This installs inline with the exhaust oxygen sensor, and alters the output voltage to trick the ECU into thinking the bike is running leaner than it is so it richens the fuel/air mixture accordingly. It’s not an exact science as the mixture is adjusted across the board, but it’s an inexpensive, easy-to-install upgrade.

Our ultimate solution was a Dynojet Power Commander III USB ($349.95 from www.dynojet.com ), which allows fine-tuning of the mixture at all rpm and throttle settings via computer. After a dozen or so dyno runs at Gene’s Speed Shop in Carson, California, our LeoVince-equipped Hyper went from 77.8 to 82.6 குதிரைத்திறன் மற்றும் 64.2 to 68.6 lbs.-அடி. of torque. More impressive was the improved driveability, which is saying something considering how fluid the two-valve, Dual Spark twin feels in stock trim.

சுவாரஸ்யமான கட்டுரைகள்

என குறித்துள்ளார்:

வகை மற்ற கட்டுரைகள் "டுகாட்டி":

 மொழிபெயர்ப்பு திருத்த
எங்கள் பங்காளிகள்
எங்களை பின்தொடரவும்
எங்களை தொடர்பு கொள்ள
எங்கள் தொடர்புகள்


Born in the USSR


இந்த தளத்தில் பற்றி

விளம்பர பற்றி அனைத்து கேள்விகளுக்கும், தளத்தில் பட்டியலிடப்பட்டுள்ள தொடர்பு கொள்ளவும்.

மோட்டார்சைக்கிள்கள் விவரக்குறிப்புடனான பட்டியல், pictures, ratings, மோட்டார்சைக்கிள்கள் பற்றிய விமர்சனங்கள் மற்றும் discusssions.